AFR SBF 225 Aluminum Race Heads, FREE FREIGHT - IN STOCK!

225cc runner

58cc chamber

.670 Solid Roller Race Springs (Upgrades available)

Sized for max effort 331-347's and performance 383-427+ CI Combinations

CNC Ported

Best bang for the buck race head available!

AFR 225cc Outlaw SBF Race Head

The Best 20° In-LineHead You Can Buy

Are you looking for big torque and horsepower number? Only AFR’s 225cc will provide you with exactly that. With the largest intake and exhaust runner volumes for our in-line Ford line up, these are the ultimate for NMRA Renegade or Hot Street classes. With 2.080 intake valves and 1.600 exhaust valves these heads move massive amounts of air. Combustion chamber volumes of 58cc accompanied by 80cc exhaust ports which are raised .375 higher than stock. AFR’s new 225cc is the perfect choice for 347 through 427 CI windsors engines operating between 4500 to 8500 rpm. Our trademark 3/4” thick head deck makes them ideal for heavy nitrous or blower applications.

Note: 2.080 valves will require aftermarket pistons notched for valve clearance.

Basic Package Components

100% CNC Ported Combustion Chambers

100% CNC Ported Exhaust Ports

100% CNC Ported Intake Ports

Competition 3-angle Valve Job

Intake Valve, 2.080” x 100L, AFR #7026

Exhaust Valve, 1.600” x 100L, AFR #7056

1.550” OD Roller Dual Valve Spring with dampner, 210 lbs. on seat, .670” maximum lift, AFR #8000

10º 4140 Chrome Moly Steel Retainers, AFR #8510

10º Valve Locks, AFR #9005

7/16” Rocker Studs, AFR #6405

5/16” Guide Plates, AFR #6107

Valve Seals, AFR #6611

Hardened Shims, AFR #8045

Intake Valve Seats, AFR #9058

Exhaust Valve Seats, AFR #9069

Bronze Valve Guides, AFR #9049

Special orders available upon request.

All Accessory Holes are Predrilled & Tapped!

Specifications, Features, and Supporting Components

Head Torque 100 Ft. Lbs. with 1/2” stud

Rocker Stud Torque 55-60 Ft. Lbs.

Intake Port Gasket, 1.400” x 2.250” with 3/8” radius AFR #6812

Exhaust Port Gasket Fel Pro #1487, AFR #6839

Head Gasket 1962-82 Fel Pro #1011-1, AFR #6808

1983-93 Fel Pro #1011-2, AFR #6809

Head Bolts & Studs Standard ARP, AFR #6318,6317

Head Bolt Washers Manley, AFR #6320

Stud Girdle Standard

Suggested Manifold Vic Jr., Super Victor

Spark Plug Starting Range Autolite 3922

Combustion Chambers 58cc

Spring Pocket can be cut to 1.625, no deeper.

Valve Spacing Standard

Rocker Arms Standard (will not accept rail rockers)

Valve Angle Standard

Angle Mill (6cc Maximum Mill) .008” per cc

Flat Mill (3cc maximum Mill) .006” per cc

Note: Milling head deck will affect flow numbers.